background image

39

EN

Symptoms

Reason

Solution

UE rebalancing operation is not 

successful.

 

The automatic attempt to rebalance

the load was not successful. The

cycle has been paused to allow the

load to be manually adjusted.

The load is too small.

 

Add more items to allow the washing

machine to balance the loads.

Heavy articles are mixed with 

lighter items.

 

Wash articles of somewhat similar

weight.

The load is out of balance.

 

Manually redistribute the load if

articles have become tangled.

Control error.

 

Unplug the washing machine and

wait 60 seconds. Reconnect power

and try again. If the error code is not

released, call for service.

Water level is too high due to a 

faulty water valve.

 

Close the water taps, unplug the

washing machine, and call for

service.

The water level sensor is not 

working correctly.

 

Close the water taps, unplug the

washing machine, and call for

service.

A motor error has occurred.

 

Allow the washing machine to stand

for 30 minutes and then restart the

cycle. If the error code is not

released, call for service.

Clutch error.

 

Unplug the washing machine and

call for service.

Tub clean Alarm.

 

Run the Tub Clean programme.

Sensor for cloth-sensing is 

defective.

 

Manually redistribute the load if

articles have become tangled.

Motor’s revolution is too low.

 

Unplug the washing machine and

wait 60 seconds. Reconnect power

and try again.

 

Call for service.

Contact-point of Connector is 

defective.
CL is not an error. This prevents 

children from changing cycles or 

operating the appliance.

 

To deactivate, press the 

Beeper

 and

Rinse

 buttons simultaneously for 3

seconds.

Summary of Contents for T2109VS2M













































Reviews: