22
OPERATION
3
Press the
Water Level
button to adjust the
water level according to the amount of laundry.
4
Add laundry into the drum.
5
Press the
START/PAUSE
button to start the
cycle(s).
6
Add the detergent into the detergent
dispenser and close the door.
NOTE
• When you set a washing cycle manually such as
rinse only, wash only or wash and rinse, the
water will not be drained out after the wash is
completed. If you wish to drain the water, select
a spin only cycle after the wash has completed.
• If a rinse only cycle is selected, the water supply
is started after detecting the load and this cycle
will start. However this cycle will start to supply
water of the selected water level if there is
already water in the drum.
• If you do not select or change the
Water Level
,
the water level will be set automatically.
Setting
Child Lock
Use
Child Lock
function to disable the controls.
This function can prevent children from changing
programmes or operating this appliance.
NOTE
• Once this function is set, all buttons are locked
except the
POWER
button.
• When the controls are locked,
CL
and the
remaining time are alternatively shown on the
display during the wash while the child lock is
engaged.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the
Water Level
and
Program
buttons simultaneously for 3 seconds to
activate this function.
Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the
Water Level
and
Program
buttons simultaneously for 3 seconds to
deactivate this function.
• When this function is deactivated, a beeper
will sound and the remaining time for the
current cycle will reappear on the display.
global_main.book.book Page 22 Wednesday, March 31, 2021 4:36 PM
