LG STYLER S3*F Series Page 38 Owner'S Manual Download

Page: 38 / 48

SMART FUNCTIONS

Smart Diagnosis™ Function

Should you experience any problems with the appliance,

it has the capability of transmitting data via your

telephone to the LG Customer Information Center. NFC

or Wi-Fi equipped models can also transmit data to a

smart phone using the LG SmartThinQ application.

Smart Diagnosis™ through the

Customer Information Center

• For a

ppliances with the

logo

1 Call the LG Electronics Customer

Information Center at:

+65 65120555

2 When instructed to do so by the call

center, place the mouthpiece of the phone

close to the Smart Diagnosis™ icon. Do not

press any other buttons.

3 Touch and hold the Sanitary icon and the

Gentle Dry icon for three seconds.

4 Keep the phone in place until the tone

transmission has finished.

5 Once the countdown is over and the tones

have stopped, resume your conversation

with the call center agent, who will then

be able to assist you using the information

transmitted for analysis.

NOTE

• Smart Diagnosis™ cannot be activated unless the

appliance can be turned on using the

Power

button.

If the appliance cannot be turned on, troubleshooting
must be done without using Smart Diagnosis™.

• For best results, do not move the phone while the

tones are being transmitted.

• If the call center agent is not able to get an accurate

recording of the data, you may be asked to try again.

• The Smart Diagnosis™ function depends on the local

call quality.

• Bad call quality may result in poor data transmission

from your phone to the call center, which could cause
Smart Diagnosis™ to malfunction.

SmartThinQ Smart Diagnosis™

• For a

ppliances with the

logo

Use the Smart Diagnosis feature in the SmartThinQ

application for help diagnosing issues with the appliance

without the assistance of the LG Customer Information

Center.
Follow the instructions in the SmartThinQ application to

perform a Smart Diagnosis using your smart phone.

NOTE

• Smart Diagnosis™ cannot be activated unless

the appliance can be turned on using the

Power

button. If the appliance cannot be turned on,
troubleshooting must be done without using
Smart Diagnosis™.

MFL66101244_Singapore.indd 38

2017. 7. 4. 오후 5:01

Summary of Contents for STYLER S3*F Series

















































Search results

Summary of Contents for STYLER S3*F Series

Reviews:

Related manuals for STYLER S3*F Series

Brands by name

Popular brands

LG STYLER S3*F Series, Owner'S Manual

Search results

Summary of Contents for STYLER S3*F Series

Reviews:

Related manuals for STYLER S3*F Series

Brands by name

Popular brands