LG STYLER S3*F Series, Owner'S Manual

Page: 32 / 48

32 OPERATION
CHOOSING A CYCLE
Styler cycles are designed to fit a variety of situations.
Select the cycle and setting that best match the load
contents and desired results for maximum performance
and fabric care. For best results, pay attention to garment
care labels and choose a cycle that is appropriate for the
fabric content of the items. See the
Fabric Care Guide on
pages 22-23. For a guide to the symbols used on fabric
care labels, see the chart on page 21.
Touch the cycle selector icon to select the desired cycle.
Press the icon repeatedly to select the desired setting.
When you select a cycle, the light for the default setting
will turn on. See
Using the Styler , page 20, for more
details on operating methods.
Refresh Cycle
Use the Refresh cycle to remove odors and wrinkles and to
dry items. This cycle uses steam and should only be used with
washable items. The cycle is safe for washable wool and knitwear.
Sanitary Cycle
Use the Sanitary cycle to reduce germs and to dry
items. Choose this cycle for clothing, bedding,
and children's clothing and soft toys. Quilts or
blankets should be a single layer and weigh 3.3
lb (1.5 kg) or less. Do not use this cycle for wool
or knitwear, because the high temperatures and
steam can cause shrinkage.
Gentle Dry Cycle
Use the Gentle Dry cycle to reduce odors and
wrinkles and to dry items. Choose this cycle for
non-washable fabrics like cashmere. There is also
a downloadable dry cycle called Fur/Leather Care
for use with fur and leather items. See
Smart
Functions, page 36, and the list of available
cycles in the SmartThinQ application.
Rain/Snow
Select this setting to refresh and gently dry damp clothing.
Dehumidify
Dehumidifies the room where the Styler is installed. Room
dehumidifying time can be set to 2 or 4 hours by pressing the
Gentle Dry button. Alarm beep and ‘Empty Water’ error will
be displayed if drain tank is full. Empty drain tank and press
Start/Pause button to continue dehumidification.
* Night Care feature cannot be used while using
Dehumidify Course
* Use while door is open 45º. If door is closed,
the course does not operate.
* Drain tank may be filled before end of
Dehumidify
cycle depending on the
environment.
* It is possible for room temperature to increase
due to outgoing airflow from Styler.
Special Care
Downloaded
Download additional cycle and use it to treat special
fabrics like fur and leather, reduce noise or remove static.
Downloaded has 4 default cycles
• Press the Special Care button and select
“Downloaded” : Select “Trouser Wrinkle Care”
- Intensively straightens wrinkles and accentuates the
creases in pants.
• Press Special Care Once : Select “Fur/Leather Care”
- Removes moisture and dust from fur/leather clothing
without damaging fabrics and restores the volume
of fur which gets flattened during storage and in
everyday activities.
• Press Special Care Twice : Select “Static Removal”
- Removes static electricity in a short amount of time
using the steam technology.
• Press Special Care 3 Times : Select “Jean Care”
- Keeps clean the jeans concerned of color migration
or washout.
- The jeans may be washed out, so use the trouser
hanger to pick it up and hang it on the moving
hanger.
You can change courses or use additional courses
through the App other than basic downloads. See
Smart Functions , page 36.
MFL66101244_Singapore.indd 32 2017. 7. 4. 오후 5:01