34
PROGRAMMING MODE
11. Penny increment pricing offset
This represents the cent increment price offset used when debit card is setup.
Entering set up
mode.
You will see LqC1
Button
display
Press the
high Temp.
button.
Press the
Med Temp.
or the
Low Temp.
button until
appears in the display.
Press the
Start
button.
Press the
Med Temp.
or the
Low Temp.
button until
appears in the display.
Press the
Start
button.
Display previous penny increment pricing offset.
Press
Med Temp.(+)
or
Low Temp.(-)
button to select value
of PIPo. (0~4)
Press the
Start
button.
The machine sets up the PIPo, then advances to the next process
automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
• OPL/Coin Type - Press “High Temp.” twice.
• Pence increment pricing offset is available only in card type.
(It hasn’t affected on the coin type’s price setting.)
NOTE
1 MFL67863726_en_180511.indd 34
2018-05-11 오후 1:16:11
