30
PROGRAMMING MODE
7. Regular priced dryer cycle time
Entering set up
mode.
You will see LqC1
Button
display
Press the
high Temp.
button.
Press the
Med Temp.
or the
Low Temp.
button until
appears in the display.
Press the
Start
button.
Press the
Med Temp.
or the
Low Temp.
button until
appears in the display.
Press the
Start
button.
Display previous regular priced dryer cycle time.
Press
Med Temp.(+)
or
Low Temp.(-)
button to select time
between
10
and
99
.
Press the
Start
button.
The machine sets up the regular priced dryer cycle time, then
advances to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
• OPL/Coin Type - Press “High Temp.” twice.
1 MFL67863726_en_180511.indd 30
2018-05-11 오후 1:16:10
