19
PROGRAMMING MODE
PROGRAMMING MODE - Setup Mode
Setup Mode :
(display)
You can change dryer vend price, cycle time, and cycle parameters, etc.
Entering set up mode
• Coin type - Turn on/off toggle switch.
• Card type - Insert the service card.
• Stack type - Take off control panel, and turn on/off toggle switch.
• OPL/Coin Type – Push “High Temp.” + “Low Temp.” and Then enter password”3”.
• Then, dryer displays
.
1. how to change regular price.
• rgCP (regular cold price) is not available in dryer.
• rgrP (regular warm price) is not available in dryer.
• rgHP (regular hot price) is not available in dryer.
NOTE
Entering set up
mode.
You will see LqC1
Button
display
Press the
high Temp.
button.
Press the
Med Temp.
or the
Low Temp.
button until
appears in the display.
Press the
Start
button.
Press the
Start
button.
Display previous regular price.
Press
Med Temp.(+)
or
Low Temp.(-)
button to set regular price.
(The vend price can be set from 0 to 9.90 in 0.1 increments.)
Press the
Start
button.
The machine sets up the regular price, then advances to the
next process automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
• OPL/Coin Type – Press “High Temp.” twice.
1 MFL67863726_en_180511.indd 19
2018-05-11 오후 1:16:07
