- 17 -
4. HDCP Download
4-1. LGIDS Setting Method
(1) Click on ÔsetupÕ to install in your directory.
(2) After installation is completed, check if the file shown on
(Fig. 4) has been created.
(3) Copy the KEY from source CD into the HDCP directory
which was installed just now.
(DVI_orderNo_2003_data)
(4) After running HDCP(application program) which is inside
the HDCP directory, setup the Communication.
Port : COM1(modification possible)
BaudRate : 115200
4-2. KEY Generation
(1) Click on ÔKey Generation (G)Õ.
(2) Input the number of the key in Generation count.
ex) If 100 Keys are required, then just register 100 and
next time it will automatically get 101.
(3) Input file : When installing the program for the first time,
you must find the original KEY that you copied and open it.
It is crucial that you copy the original KEY into this
directory.
When you use Generation, the information is recorded in
Config.ini.
(4) Click on ÔGenerationÕ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ(1)
If it is done correctly, you will see ÒJob is Success.ÓÑÑ(2)
Click on ÔcloseÕÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ(3)
(5) Check the Generation Data(Confirmation itÕs possible
within HDCP\CreatedKeyFile)
(Fig. 3)
(Fig. 5)
(Fig. 6)
(Fig. 4)
