If the projector is installed on a place that is not stable or horizontal, the projected screen shape
will be distorted.
R
Horizontal leveler
●
Adjust the screen shape to be horizontal and rectangular with horizontal leveler as above.
●
Avoid impact or extra weight on top of the projector as it may cause the feet to alter position or damage them.
Operating the Projector
Focus and Position of the Screen Image
Focus and Position of the Screen Image
When an image appears on the screen, check if it is in focus and fits well to the screen.
●
To adjust the focus of the image, rotate the focus ring which is the outer ring on the lens.
●
To adjust the size of the image, rotate the zoom ring which is the inner ring on the lens.
To raise or lower the image on the screen, extend or retract the foot at the bottom of the projector
by pushing foot adjuster button as below.
1.
Stand behind the projector and lift the foot adjuster levers while you support the front of the projector.
2.
While pressing the foot adjuster button, raise or lower the projector to place the screen image in the proper position.
3.
Release the button to lock the foot in its new position.
4.
To fine-tune the height of the projector, rotate the front foot to raise or lower it.
After raising the front foot, do not press down on the projector.
R
R
Focus ring
Zoom ring
25