LG RHT497H Service Manual Download Page 7

Page: 7 / 137

1-6

SERVICE INFORMATION FOR EEPROM IC SETTING

1. Press both “CLEAR” button on the Remocon and “

OPEN/CLOSE” button on the Front Panel about ±5

sec.

The picture on OSD will be as bellow :

2. To MOVE from OP1 (Option 1) to another option, press

◀▶

button on the Remote Control.

3. To CHANGE the option code, press

▲▼

button on the Remote Control.

4. To APPLY the option Code, after change the option press OK/Enter button on Remote Control.

5. To INITIALIZE the system, press “CLEAR” button on the R/C together with “

OPEN/CLOSE” on the Front

Panel about ±5 sec.

Note : This process will only clear the mapping channel and not delete data on HDD.

6. To exit from the option Code menu without Initialize the system, just turn off the power and then turn on

again.

OP1 :

OP2 :

OP3 :

OP4 :

OP5 :

OP6 :

OP7 :

OP8 :

OP9 :

OPA :

[LGEDG / LGEHS]

Checksum of Option : 0x1105

DVD read time : --- second

CD read time : 10 sec -- > OK

00000000

071102A

00000000

Write : OK

00000000

E x i t : MP

00000000

Move : < >

00000000

E d i t :

Summary of Contents for RHT497H










































































































































Search results

Summary of Contents for RHT497H

Reviews:

Brands by name

Popular brands

LG RHT497H, Service Manual

Search results

Summary of Contents for RHT497H

Reviews:

Brands by name

Popular brands