SETTING AND USING METHOD
ENGLISH
11
Position
Function
ON
L1 2
ON : Ignore minimum Analog output value setting
(L1,L2 setting value of 4pin Dip SW)
OFF : Follow minimum Analog output value setting
(L1,L2 setting value of 4pin Dip SW)
Position
Function
ON
L1 2
ON : Analog output 0V
OFF : Analog output 10V
L1
ON
2
• L1 : Set Analog output default value when Communication Error will be occur (Module – ODU)
• L2 : Set Analog output Range
Basically this module keeps a minimum Analog output voltage refer to L1,L2 setting of SW101
to prevent unexpected accident. When you need to use 0~10V full range, L2 should be set as
ON.
Using ‘SW102’, set the internal function as described below.
CAUTION
After change Dip SW setting, press reset switch to reflect the setting.
!
NOTE
!
Default status is all off
