Owner's instruction
Owner’s & Installation Manual
31
ENGLISH
Owner's instruction
30
Wide Wired Remote Controller
Temperature setting/ room temperature check
We can simply adjust the desired
temperature.
• Press the buttons to adjust the
desired temperature.
: Increase 1˚C or 2˚F per one time
pressing
: Decrease 1˚C or 2˚F per one time
pressing
Room temp: Indicate the current room
temperature.
Set temp: Indicate the temperature that
user want to set.
Depend on what kind of controller, the
desired temperature can be adjusted at
0.5˚C or 1˚F.
Cooling operation:
The cooling mode
doesn't work if
desired
temperature
is higher than room
temperature Please
lower the desired
temperature.
Heating operation:
The heating mode
doesn't work if
desired
temperature
is lower than room
temperature Please
increase the desired
temperature.
1
Whenever press button, the room
temperature will be displayed within 5
seconds.
After 5 seconds, it turns to display the
desired temperature.
Because of location of remote controller,
the real room temperature and the this
displayed value can be different
2
Fan Mode
Press button to turn on the
indoor.
1
Press button.
2
Press the button to select
airflow rate SLO
→
LO ’ MED
→
HI
→
(NONE)
→
3
(The lists depends on products function)
❊
When operating in wind mode, the outdoor compressor doesn't work.
❊
FAN operation doesn't bring out cold air but air from regular fan comes out.
