Installation instruction
24
Wide Wired Remote Controller
Installation instruction
Owner’s & Installation Manual
25
ENGLISH
Installer Setting -Optional Function Setting
Function Code
Existing condition
Press button for 4 seconds
to enter the installer setting
mode until timer segment
display “01:01”.
1
Select existing condition
of each mode by pressing
button.
(00: not installed,
01 : installed)
3
Press button to save or
release.
4
Press button to exit or
system will automatically exit
after 25 seconds without any
input.
5
Repeat pressing button to select
function code.
(20: PLASMA PURIFICATION,
21: DEHUMIDIFIER,
22: ELECTRIC HEATER,
23: ELEVATION GRILL,
24: VENTILATION KIT)
2
For the optional product such as PLASMA PURIFICATION/DEHUMIDIFIER/ ELECTRIC HEATER
and VENTILATION, ELEVATION GRILL.
It is possible to set the items are installed or not
Function Code
Zone Number installed
Press button for 4 seconds
to enter the installer setting
mode until timer segment
display “01:01”.
1
Press button to exit or
system will automatically exit
after 25 seconds without any
input.
5
Repeat pressing button to select
Function code 14.
Ex) Setting the Zone Number for "2"
2
Select Zone Number by pressing
button
(02~04 : number of zone installed)
3
Press button to save or release.
4
Installer Setting-Zone Number Setting
This function is only available on some products.
Zone Number is to set the number of installed zones. It's possible to control only in zone new type
