Owner's instruction
Owner’s & Installation Manual
29
ENGLISH
Owner's instruction
28
Wide Wired Remote Controller
Press button to turn on the
indoor.
1
Press button to select Auto
Operation Mode.
2
Incase of operating under
only cooling mode, set '0' as
standard level, we can adjust
the temperature from step -2
to step 2.
3
Auto Operation Mode
During operating Auto Operation mode:
• We can use the FAN SPEED button
• We can change manually to other operation mode.
Dehumidification Mode
Press button to turn on the
indoor.
1
Press button to select
Dehumidification mode.
The temperature setting can not
be adjusted during operation
this mode.
2
Press the button to select
airflow rate SLO
→
LO ’ MED
→
HI
→
(NONE)
→
(The lists depends on products function)
❖
NONE : Power level of Fan Speed
3
In rainy season or high humidity climate, it is possible
to operate simultaneously dehumidifier and cooling
mode to remove humidity effectively.
❖
Auto Changeover mode and Auto Operation mode may not operate depending on product type.
For more detail please refer the product manual.
Please select the code defend on your feeling.
Press button to turn on the
indoor.
1
Press button to select Auto
Changeover Mode.
2
The setting temperature as
the right side picture can be
set in both cooling/ heating
model.
3
Auto Changeover Mode
❖
Setting Temp Range : 18˚C~30˚C (64˚F~86˚F)
Code
Feel
2
Cool
1
Slightly cool
0
Neutral
-1
Slightly warm
-2
Warm
<Code Table>
