45
CUSTOMIZING SETTINGS
Expert Control
Setting
Description
Dynamic
Contrast
Adjusts the contrast to keep it at the best level for the brightness of
the screen.
Color Gamut
Selects the range of colors to display.
y
Standard
: Displays the original colors of an input signal regardless
of the display features.
y
Wide
: Sets to use the rich colors of the display.
Edge Enhancer
Provides much sharper and clearer edges to the picture.
Color Filter
Accurately adjusts color and tint by filtering a specific color area of
RGB space.
Color
Temperature
Gamma
Sets a gradation curve between video input and output signal.
a. Method: 2 points
- Pnttern: Inner, Outer
- Points: Low, High
- Red/Green/Blue: The adjustment range is -50 - +50.
- Apply to all inputs: The values of the Color Temperature is applied
to all the input modes.
b. Method: 10 points IRE
- Pattern: Inner, Outer
- Institute of Radio Engineers (IRE) is the unit indicating the size of a
video signal and can be set to 5, 10, 15, ... 100. You can fine-tune for
each setting as shown below.
- Luminance: If you set up luminance for 100 IRE, a luminance value
satisfying each gamma is automatically calculated for
each step from 10 IRE to 90 IRE.
- Red/Green/Blue: The adjustment range is -50 - +50.
- Apply to all inputs: The values of the Color Temperature is applied
to all the input modes.
Color
Management
system
Adjusts Red/Green/Blue/Cyan/Magenta/Yellow colors. Allows an
expert to adjust the tint using a test pattern. Six colors (Red/Green/
Blue/Cyan/Magenta/Yellow) can be selectively adjusted without
affecting other colors.
You may not see colors change on a normal picture even after
adjustment.
Chroma Red/Green/Blue/Yellow/Cyan/Magenta,
Tone Red/Green/Blue/Yellow/Cyan/Magenta:
The adjustment range is -30 - +30 each.
* Available options may differ depending on the input signal or video mode, etc.