manualshive.com logo in svg

LG PBACNBTR0, Installation Manual, Page: 9 / 24

Share
Download
LG PBACNBTR0 Installation Manual Download Page 9

9

Installation Manual

Due to our policy of continuous product innovation, some specifications may change without notification.  

©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.

INTRODUCTION

LG MultiSITE

TM

 Communications Manager Controller

This manual describes how to install the MultiSITE Communications Manager controller (Model Number: PBACNBTR0A). The MultiSITE 

Communications Manager is a compact and powerful controller that allows third party integration of LG HVAC system into Building Manage-

ment System via BACnet®, LonWorks® and Fox® protocols. The MultiSITE Communications Manager is a network ready, out of the box 

integration solution and includes the LG pre-engineered, graphical user interface. The controller integrates all LG Multi V™ systems, Multi F 

systems, and select LG single zone systems with third party building management systems. 
Refer to the LG MultiSITE Communications Manager User Manual for details on the controller’s graphical user interface. User Manual can be 

located on 

www.lghvac.com. 

LG MultiSITE™ Communications Manager will be referred to as MultiSITE Communications Manager in this manual. PBACNBTR0 is the 

model number for the MultiSITE Communications Manager controller. ZSMA01BMS is the model number for the software maintenance 

agreement. 

Figure 1:  MultiSITE Communications Manager Controller.

* Niagara Framework, Niagara 4 Framework, and the Niagara AX Framework are trademarks of Tridium, Inc. * LonWorks is a registered trademark 

of Echelon. 

* BACnet is a 

registered trademark of ASHRAE. All other product names and services mentioned in this publication that is known to be 

trademarks, registered trademarks, or service marks are the property of their respective owners. 

Items Included with the Controller

Table 1 lists the items included with the MultiSITE Communications Manager controller. 

Part

Quantity

MicroSD card in plastic case

1

Coax-mount, dual 2.4/5.8GHz antenna for WiFi

1

3-position RS-485 connector plugs

2

Table 1: Included items.

LonWorks® 

Summary of Contents for PBACNBTR0

























Reviews:

No comments