6
ENGLISH
3
How to install the wall mounting bracket
K
H
G
F
E
D
C
B
A
1
2
3
4
5
6
7
8
Wall mounting screw
→
After aligning the wall mounting bracket to the
location to install, mark the part to screw on the wall
and then remove the wall mounting bracket.
→
Refer to next picture to attach the wall mounting
bracket.
→
Use a level to check whether the wall mounting
bracket is level.
→
If the screw cannot be assembled in the designated
location inevitably, it can be assembled by
rearranging to the closest location. But, do not
change 2 or more locations from the designated
spot.
→
Assemble the wall mounting screw on 2 left and 2
right location on the top part and 1 left and 1 right
location on the bottom part.
→
At this time, use a + driver (manual or motorized) or
8 mm wrench to tighten the screw so that the wall,
wall mounting bracket and screw are completely
pressed against one another.
4
How to assemble the wall mounting bracket and display
- Always install the display with 2 or more people.
A
(2/1)
* Caution: Prevent the power cord from being pinched between the
wall mounting bracket and the set when installing the set.
(A pinched power cord may cause damage to the product.)
When inserting the guide spacer, align
its center with the arrow shown in the
figure for easy installation.
→
After attaching the guide spacers to the set, hang it on the wall mounting bracket in the direction of the arrows. Attach the
lower part first, then attach the upper part by slightly lifting up the set.
-
Make sure that the product is attached securely by pulling on the bottom of the set.
-
When mounting the product that has a speaker, hold and lift up the product, not the speaker.
