11
ENGLISH
Registering magic remote
How to register the magic remote
To use the Magic Remote, first pair it with your TV.
1
Put batteries into the Magic Remote and turn the TV on.
2
Point the Magic Remote at your TV and press the Wheel (OK)
on the remote control.
- If the TV fails to register the Magic Remote, try again after
turning the TV off and back on.
How to deregister the magic remote
Press and hold the
and (HOME) buttons at the same time
for five seconds, to unpair the Magic Remote with your TV.
- Pressing and holding the
button will let you cancel and
reregister Magic Remote at once.
Licenses
Supported licenses may differ by model. For more information about
licenses, visit
www.lg.com
.
Open source software notice information
To obtain the source code under GPL, LGPL, MPL, and other open
source licenses, that is contained in this product, please visit
http://
opensource.lge.com
.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
. This offer is valid for three (3) years from the
date on which you purchased the product.
External control device setup
(Depending on model)
To obtain the external control device setup information, please visit
www.lg.com
.
Troubleshooting
• Cannot control the TV with the remote control.
- Check the remote control sensor on the product and try again.
- Check if there is any obstacle between the product and the
remote control.
- Check if the batteries are still working and properly installed (
to , to ).
• No image display and no sound is produced.
- Check if the product is turned on.
- Check if the power cord is connected to a wall outlet.
- Check if there is a problem in the wall outlet by connecting other
products.
• The TV turns off suddenly.
- Check the power control settings. The power supply may be
interrupted.
- Check if the Sleep Timer / Timer Power Off is activated in the
TIMERS settings.
- If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
• When connecting to the PC (HDMI), ‘No signal’ or ‘Invalid Format’
is displayed.
- Turn the TV off/on using the remote control.
- Reconnect the HDMI cable.
- Restart the PC with the TV on.
• A blue light blinks on the front of the Companion Box (AV Box).
- The TV may have a problem with the cooling fan or the
temperature in the TV may be too high. Contact an authorized
service center.
• A magenta light blinks on the front of the Companion Box (AV Box).
- The TV may have a problem in the moving speaker. Contact an
authorized service center.
• An orange light blinks on the front of the Companion Box (AV Box).
- The cable from panel may not be properly connected to the
Companion Box (AV Box). Unplug the power cord and reconnect
the cable and then plug the power cord and press the power
button. If it still doesn’t work after the steps above, contact an
authorized service center.
MFL69830001_OLED_W7_S_HK_Eng.indd 11
2017-01-06 4:04:04
