LG MUSICflow DSH9, Owner'S Manual

Page: 59 / 75

Operating 59
Oper
ating
3
1. Select the Bluetooth function by using F on the
remote control or F on the unit until the function
is selected.
Appears “BT” and then “BT READY” in display
window.
2. Operate the Bluetooth device and perform
the pairing operation. When searching for this
speaker on your Bluetooth device, a list of the
devices found may appear in the Bluetooth device
display depending on the type of Bluetooth device.
Your speaker appears as “LG DSH9(XX:XX)”.
3. Select the “LG DSH9(XX:XX)”.
y
XX:XX means the last four digits of
address. For example, if your unit has a
MAC address such as 20:C3:8F:C9:
31:55 ,
you will see “LG DSH9(31:55)” on your
Bluetooth device.
y
Depending on the Bluetooth device type,
some device have a different pairing way.
Enter the PIN code (0000) as needed.
,
Note
4. When this unit is successfully connected with
your Bluetooth device, “PAIRED” will appear on
the display window.
5. Listen to music.
To play music in your Bluetooth device, refer to
your Bluetooth device’s user guide.
According to your Bluetooth device’s volume level,
the volume level of Bluetooth will be adjusted.
y
When using Bluetooth technology, you have
to make a connection between the unit and
the bluetooth device as close as possible and
keep the distance.
However it may not work well in the case
below :
- There is a obstacle between the unit and
the bluetooth device.
- There is a device using same frequency
with
Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
,
Note
y
This unit supports Bluetooth auto pairing.
However it does not operate in the case
below:
- When you restart this unit.
- When you disconnect this unit by yourself.
- When you disconnect this unit on the
connected Bluetooth device.
y
The sound may be interrupted when the
connection is interfered with by the some
other electronic wave.
y
You cannot control the Bluetooth device with
this unit.
y
Pairing is limited to “One” Bluetooth device.
Multi-Pairing is not supported.
y
Depending on the type of the device, you may
not be able to use the Bluetooth function.
y
You can enjoy using
Bluetooth
when using
Phone, MP3, Notebook, etc..
y
The more distance between the unit and the
bluetooth device, the lower the sound quality
becomes.
y
The Bluetooth connection will be
disconnected when the unit is turned off or
the Bluetooth device gets too far from the
unit.
y
If the Bluetooth connection is disconnected,
connect the Bluetooth device again.
y
When a Bluetooth device is not connected,
“BT READY” appears on the display window.
y
If you set the Wi-Fi function in the state
of unconnected network,
Bluetooth
and Wireless TV Sound Sync may not be
connected.
,
Note