manualshive.com logo in svg

LG MultiSITE VM3, Startup Manual, Page: 17 / 56

Share
Download
LG MultiSITE VM3 Startup Manual Download Page 17

17

Start-Up Guide

Due to our policy of continuous product innovation, some specifications may change without notification.  

©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.

Starting the Commissioning Wizard

Prerequisites: Using MultiSITE Supervisor, open a platform connection to a MultiSITE VM3 controller.

1. In the Nav tree, right-click on Platform and select Commissioning Wizard. The dialog box Commissioning for “<IP address>” displays 

(shown here with default selections for a new MultiSITE VM3).

RUNNING THE COMMISSIONING WIZARD

Figure 5:  Commissioning Wizard.

By default, all steps are preselected except lexicon installation. Steps are executed in the order listed in the wizard.
2. As needed, click to include or omit steps. For a new MultiSITE VM3 controller, you typically accept all default selections. 
Commissioning steps include:

•  Request or install software licenses: Preselected for any new MultiSITE VM3 controller.
• 

Set enabled runtime profiles: Preselected and read-only for any new unit.

•  Install a station from the local computer: Recommended. Optionally, you can install station(s) at a later time.
• 

Install lexicons to support additional languages: Option to install file-based lexicon sets (alternative to lexicon modules). Typically you leave 

this cleared, lexicon modules are required in N4.

•  Install/upgrade modules: Always preselected, whenever wizard is run. To select the software modules, and optionally any lexicon modules.
• 

Install/upgrade core software from distribution files: Preselected and read-only for any new unit.

•  Sync with my local system date and time: Preselected in most cases. For a new MultiSITE VM3 for example, the controller time may 

greatly differ from actual time.

• 

Configure TCP/IP network settings: Recommended.

•  Remove platform default user account: Preselected and read-only for a new unit. You cannot commission a unit with the factory default 

platform user. 

•  Configure additional platform daemon users: Recommended option if you require additional platform admin user accounts, with unique 

user names and passwords (all have full equal privileges).

3. Click the Next button to continue.

Summary of Contents for MultiSITE VM3

























































Reviews:

No comments