54
MUL
TI V Ceiling Cassette Indoor Units
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
WIRING
6. Connect the power wiring to the terminal block connections. Ensure the screws securely connect the wire to the terminals and are not
loose.
• For One-Way Cassettes: Terminal Block 1(L1) and 2(L2) connections.
• For Two-Way and Four-Way Cassettes: Terminal Block L(L1) and N(L2) connections.
7. Connect the field-provided communications cable to the 3(A) and 4(B) or A and B terminal block connections. Polarity matters on the
outdoor unit to indoor unit / heat recovery unit communications bus, and must be maintained throughout the entire system. Be sure to con-
nect 3(A) or A terminals to A terminals, and 4(B) or B terminals to B terminals. Refer to the next pages for indoor unit wiring connections,
the Outdoor Unit Installation Manual for information regarding the outdoor unit and heat recovery unit wiring connections, or review the
wiring diagrams on the applicable units.
•
&URVVFRQQHFWLQJWKH$DQG%RU$DQG%WHUPLQDOVZLOOFDXVHFRPPXQLFDWLRQVHUURUVDQGV\VWHPPDOIXQFWLRQ
•
)LHOGSURYLGHGFRPPXQLFDWLRQFDEOHEHWZHHQ0DLQ2'8WR,'8V+58VWREH$:*FRQGXFWRUWZLVWHGVWUDQGHGVKLHOGHG(QVXUH
WKHFRPPXQLFDWLRQFDEOHVKLHOGLVSURSHUO\JURXQGHGWRWKH0DLQRXWGRRUXQLWFKDVVLVRQO\
'RQRWJURXQGWKHRXWGRRUXQLWWRLQGRRU
XQLWVKHDWUHFRYHU\XQLWVFRPPXQLFDWLRQFDEOHDWDQ\RWKHUSRLQW:LULQJPXVWFRPSO\ZLWKDOODSSOLFDEOHORFDODQGQDWLRQDOFRGHV
8. If a remote controller is to be installed, connect the remote controller’s cable to the indoor unit’s remote controller connection. Controller
connections depend on type of indoor unit being installed. Some indoor units use terminal block connections; other indoor units use Molex
connections. See the wiring diagram for each specific indoor unit.
9. Connect any additional cables required for the installation such as those for the decoration panels.
&RQQHFWLRQ3URFHGXUH