29
Installation Manual
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
GENERAL INSTALLATION GUIDELINES
Unpack and Inspect for Freight Damage
CAUTION
6KLSSLQJDQGQHWZHLJKWVRIWKHFHLOLQJFDVVHWWHXQLWVDUHOLVWHGLQWKHVSHFL¿FDWLRQWDEOHVLQWKHEHJLQQLQJRIWKLVPDQXDO7RKHOSDYRLGLQMXU\WR
SHUVRQQHOXVHDWOHDVWWZRSHRSOHZKHQFDUU\LQJDXQLWE\KDQG
•
6KLSSLQJDQGQHWZHLJKWVRIWKHFHLOLQJFDVVHWWHXQLWVDUHOLVWHGLQWKHVSHFLILFDWLRQWDEOHVLQWKHEHJLQQLQJRIWKLVPDQXDO7RKHOSDYRLG
GDPDJHWRWKHXQLWXVHDWOHDVWWZRSHRSOHZKHQFDUU\LQJDXQLWE\KDQG
•
%HIRUHRSHQLQJWKHVKLSSLQJFRQWDLQHUFKHFNWKHFRQWDLQHUODEHOLQJWRYHULI\WKHXQLWUHFHLYHGLVWKHFRUUHFWXQLW9HULI\WKHXQLWFDSDFLW\
W\SHDQGYROWDJH5HIHUWRWKH³&DVVHWWH,QGRRU8QLWV1RPHQFODWXUH´FKDUWLQWKHEHJLQQLQJRIWKLVPDQXDO
•
$IWHURSHQLQJLIWKHXQLWLVGDPDJHGUHSDFNWKHXQLWDVLWZDVVKLSSHGWRWKHVLWH5(7$,1$//3$&.,1*0$7(5,$/6,QJHQHUDOIUHLJKW
GDPDJHFODLPVZLOOEHGHQLHGLIWKHRULJLQDOSDFNLQJPDWHULDOVDUHQRWUHWDLQHGIRUWKHFODLPVDGMXVWRUWRLQVSHFW&DOO\RXUVXSHUYLVRURQ
KRZWRSURFHHGZLWKILOLQJDIUHLJKWFODLPDQGWRRUGHUDUHSODFHPHQWXQLW
•
7RDYRLGGDPDJLQJWKHLQGRRUXQLW
GRQRWXQSDFNWKHXQLWDQGUHPRYHWKHSURWHFWLYHPDWHULDOVXQWLOLWLVUHDG\WRLQVWDOO%HIRUHXQSDFN
-
LQJFDUHIXOO\PRYHWKHSDFNDJHGXQLWWRDZRUNDUHDQHDUWKHLQVWDOODWLRQORFDWLRQ
1. Before opening the shipping container, verify that the correct unit is present as described in the Note above.
2. Place the box on a solid surface right side up.
3. Cut the white reinforced nylon straps.
4. Open the top of the box and fold back all four flaps.
5. Remove the protective cardboard/Styrofoam
®
top sheet and place to the side.
6. The walls and top panels are not attached to the bottom of the box. Lift the cardboard carton by the flaps and remove the box walls and
top and place it to the side.
7. Remove the moisture barrier plastic bonnet.
8. Check the unit nameplate data and model number. Verify the unit voltage and capacities are correct before proceeding.
9. Locate and retain the piping/condensate accessory kit located in the bottom of the box under the refrigerant pipe stubs.
10. Using two people, carefully lift the unit and inspect for freight damage.
DO NOT lift by the refrigerant piping or drain pipe stub. Lift by
the hangar brackets or frame only. If damage is found, repack the unit as it was received in the original container.
8QSDFNDQG,QVSHFW