LG MM-624AMZ, Owner'S Manual

Page: 7 / 14

6
Display and Features
If These Features are
Different from Yours
These features are intended to
show the variety that is
available in the product line. If your
microwave does not have all the options
that are shown, it is not a mistake. The
information provided applies to several
of the models in the product line.
OP:--
User Options
This microwave can be set for specific user preferences.
Options such as beep volume, maximum cooking time, and the
number of programmable pads can be changed. To change different options,
see User Options in this manual.
P:-- 1
Stage Cooking
Stage cooking is a cooking sequence with specific power stage
changes. The user can program up to four different power level changes and
the specific amount of cooking time at each power level. Each power level/
cooking time combination is known as a stage. Up to four stages can be
programmed. Stage cooking is available only in some electronic control
models.
X 2
X2 Pad
The X2 Pad increases a preset cooking time by a percentage of
the original cooking time (cooking factor). The user specifies the
percentage and it can be changed for individual cooking sequences. This
feature is very useful for cooking multiple servings of foods such as potatoes
or slices of pizza. The X2 pad can be used with either single or double pad
programming. To change the cooking factor, see Programming the Oven
Control.
Time
Entr y
Manual Time Entry
In addition to programmable pads, this microwave also accepts
specific time entry by using the TIME ENTRY pad. Using manual
time entry does not affect the programmed buttons.
0 7
Double Pad Programming
This feature enables 100 programmed entries to be
made. Each entry will be assigned a double digit
number, for example 01, 05, or 20. When using the double pad programming,
two pads must be pressed to start the cooking cycle.
Single Pad Programming
This feature enables each numbered pad to be programmed for
a specific use, such as cooking a certain number of potatoes or
defrosting and then cooking vegetables or other frozen foods. To use this
feature, simply program the pad to the desired length of time and power level.
To use this feature, press the pad once and the microwave will begin cooking.
7
START Pad
The start pad is used to
begin a manual time
entry cooking cycle. It is also used to
save any changes to programming
sequences or user options.
START
STOP pad
The STOP pad stops a
cooking sequence in
progress, clears out any remaining
time, and also ends a programming
or user option cycle. When the
STOP pad is used to end a
programming or option change, the
changes are discarded.
STOP