background image

11

Dial Operation

Heating

1. Open oven door, place food in oven, and close oven door.

2. Turn time entry knob clockwise until desired time displays.

• Cooking time can be set up to 30 minutes.

3. Turn the power level knob to desired power level.

• Power level can be set from full power (100%) to 15%.

4. Press 

 (START) button

.

• Oven begins operation and time counts down.

5. When cooking time elapsed, microwave energy stops and oven signal

sounds.

Interrupting Operation

Open oven door to interrupt operation or turn time entry knob

counterclockwise to “0”.

To resume microwave oven operation, close door and press 

 (START)

.

If time was changed to “0”, time will need to be reset, and then
press 

 (START)

.

Changing Time and Power/Canceling

Mistakes

Heating time and power level can be changed at any time while the oven is

operating. Turn knobs to desired new setting. To set cooking time to zero,

turn knob counterclockwise to “0”.

Dial option is available on some models only.

If  These Features are

Different from Yours

These features are intended to
show the variety that is available

in the product line. If  your microwave
does not have all the options that are
shown, it is not a mistake. The information
provided applies to several of the
models in the product line.

Summary of Contents for MM-624AMZ















Reviews: