5-12
COMPONENTS
TEST PROCEDURE
RESULTS
RELAY 2
(Power Relay)
FAN MOTOR
TURNTABLE
MOTOR
1. Measure continuity.
2. Remove the lead wires and operate oven
at power level 1 through power level 10.
1. Remove wire leads.
2. Measure resistance.
1. Remove wire leads.
2. Measure resistance.
POWER
LEVEL
1
4 sec
18 sec
2
6 sec
16 sec
3
8 sec
14 sec
4
10 sec
12 sec
5
12 sec
10 sec
6
14 sec
8 sec
7
16 sec
6 sec
8
18 sec
4 sec
9
20 sec
2 sec
10
22 sec
0 sec
Normal:
A:Approximately
400~469 ohms.
B:Approximately
60~80 ohms.
Abnormal:
Infinite
Normal: Approx.12.0~14.0
Kohms
Abnormal: Infinite or several
ohm.
NOTE : • A MICROWAVE LEAKAGE TEST MUST ALWAYS BE PERFORMED WHEN THE UNIT IS SERVICED FOR
ANY REASON.
• MAKE SURE THE WIRE LEADS ARE IN THE CORRECT POSITION.
• WHEN REMOVING THE WIRE LEADS FROM THE PARTS, BE SURE TO GRASP THE CONNECTOR, NOT
THE WIRES.
0
0.L
Summary of Contents for MD-2642KT
