LG LWD3010ST, Service Manual

Page: 38 / 73

7-1
CHECK THE FAILURE CODE (F-code)
■
When the oven has some failure on cooking
- Oven may stop operating and F-code will display in display window.
- Some F-codes display immediately(F-3,F-9, F-19), but other codes will store in EEPROM memory
and not displayed
■
F-codes can only be viewed by following the below Step
1. press the “clear” key
2. Press and Hold “LOWER BAKE” and “LOWER BROIL” key for 3 seconds
If the oven has some failure, the oven will show the failure code, like FIG. 1
It shows the type of F-code and times of occurred failure.
If the oven does not have any failure, the oven will display like FIG. 2.
NOTE:
After checking the failure code, press the “CLEAR” key
< FIG. 1 >
< FIG. 1 >