
7.4.2 Removing the door with pins
Open the door completely and insert the pins (supplied) into the
holes from the inside. Close the door to an angle of about 45° and
lift it off. To reassemble, fit the hinges into their grooves, then lower
the door into place and extract the pins. If the pins get lost, two
screwdrivers can also be used.
7.5 Removing the glass panels
The glass in the door should always be kept thoroughly clean. For
easier cleaning, the door glazing can be fully removed by
proceeding as described below. After opening the door and locking
it in place as described in point “7.4 Removing the door”, remove
the internal glass pane levering it as illustrated in figure 1, and
detach the 4 pins that fix the glass to the door. If your oven also has
a middle glass pane (figure 2) this can be extracted simply by lifting
it upwards. After having carried out the cleaning, first of all replace
the middle glass panel (if your oven has one), and then position the
internal glass hinging it, as shown in figure 3, on the grooves of the
oven door (see part
A
in figure 3). When the glazing has been
positioned on the door, exert a slight pressure on the four fixing
pins.
If the door should close during these operations, simply relock one
of the hinges as described in point “7.4 Removing the door”. The
glass panels can now be washed separately.
27