background image

4

Important Safety Instructions

9. Do not defeat the safety purpose of the polar-

ized or grounding-type plug. A polarized plug
has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safe-
ty. If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.

10. Protect the power cord from being walked

on or pinched particularly at plugs, conven-
ience receptacles, and the point where they
exit from the apparatus.

11. Only use attachments/

accessories specified by
the manufacturer.

12. Use only the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold
with apparatus. When a cart is used, use
caution when moving the cart/ apparatus
combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning

storms or when unused for long periods of
time.

14. Refer all servicing to qualified service per-

sonnel. Servicing is required when the
apparatus has been damaged in any way,
such as power- 
supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed
to rain or moisture, does not operate nor-
mally, or has been dropped.

LVC-SX703PC_AA4HEL_ENG_MFL-129  11/7/06  12:05 PM  Page 4

Summary of Contents for LVC-SX703MB









































Reviews: