The Adjustment method of Line Lock Phase
When using a camera switcher to connect 2 cameras or
more to one monitor, there may be a vertical roll of the
images when switched. In such a case, refer to the
below.
-The vertical sync phase can be manually adjusted
within the range approximately from -90
o
to +90
o
.
- Switch the display on the monitor from camera1 to
camera2.
Adjust the PHASE volume on camera2 until the
vertical roll of the image stops.
If more than two cameras are used, please repeat this
procedure for all the cameras.
- If you can’t adjust vertical sync. phase,
Please exchange the polarity of input terminal.
➀
Camera switcher
②
Monitor
➂
Vertical phase
6
OPERATING CONTROLS AND THEIR FUNCTIONS
➀
②
➂
All manuals and user guides at all-guides.com
all-guides.com
