AE SET
16
4-4. BRIGHTNESS ADJUSTMENT Set :
A) Select the "BRIGHTNESS" in submenu using Tele/wide key.
B) Adjust the level from ##MIN to ##MAX. using Focus key.
* ## : Current level at Auto mode.
4-5. BACKLIGHT Set :
A) Select the "BACKLIGHT" in submenu using Tele/wide key.
B) Set the mode OFF, ON, or AUTO using Focus key.
* Auto BLC (Auto back light compensation)
When a back light condition occurs in area1,area2, area3, or area4.
the back light compensation is enable. When the back light
condition disappears in that area,
BLC is disable automatically. If do not want this mode, set to OFF
4-6. FLICKERLESS Set :
A) Select the "FLICKERLESS" in submenu using Tele/wide key.
B) Set the mode OFF, ON using Focus key.
* FLICKERLESS ; Use for removing the flicker of picture
ON : Remove the flicker ( In case of NTSC System ; Shutter Speed
1/100 sec
In case of PAL System ; Shutter Speed 1/120 sec ).
Area1
Area
2
Area
3
Area
0
Area
4
Auto BLC
Summary of Contents for LVC-A910
