12
INSTALLATION MENU
ENGLISH
-
System Provider Mode
- ‘System Provider Mode’ allows access to the menu system from the front panel or remote control
but access is controlled as follows:
y
y
When value is ‘Yes’, Accessible Items on the menu system, others are not permissible.
»
Input select screens
»
Sleep timer
»
Alarm (Only for LV5**H series)
»
Aspect Ratio
»
Subtitles
»
Lock System, Set Password
»
‘My Media’ / ‘Network’ Menu
»
‘Support’ Menu(* LV30* C series use ‘About This TV’)
y
y
‘Q.menu’, which is related to ‘Setup Menu or Programmes Menu’, is not accessible.
y
y
If the channel map is empty, ‘Auto-tuning’ guide dialog should be blocked by pressing ‘List’, ‘Fav’, ‘CH+’,
‘CH-’ keys.
6
Power Management
The Power Management feature will turn off the television receiver if no input control command is received from
either the Local or IR Key within a selected hours.
y
y
Activity on either of these inputs shall restart the ‘Power Management’ timer and check key time interval
again.
y
y
This entry can be set to a value which is corresponding to the desired hours (1 to 7).
y
y
Default value is ‘Off(disabled)’.
y
y
TV should off and on after apply this setting.
7
DTV Programme Update
- It is a mode to set whether to update DTV channel information automatically or not.
y
y
When DTV Channel Update is set to ’Auto’, the function to update TV’s programme map according to
DTV channel’s stream information
y
y
DTV Channel Update is set to ‘Manual’, the function to keep TV’s channel map even though DTV
programme’s information is changed.
8
Power On Default
Set the input source or channel to display and. A/V settings when turn on power in AC Power On or Stand-by
status.
-
Input Source
Set whether it is turned on by the set input source or by the last stored input source.
y
y
It is turned on by the Last Memory Input if the Input source is turned off.
y
y
It is turned on by the Last Pr. If the Input source is turned off and the last memory Input is the RF.
y
y
The available Input Source values should be rotated.
y
y
If both the Input source and the ‘Timer Power On’ menu are set, the Input source takes the priority.
y
y
When the Input source is changed to the TV, Programme menu is available.
y
y
When the Input source is changed to the ATV, the Program No. is set to 0. (If the channel map structure
does not support this, it depends on model’s channel handling.
y
y
Access to an input source item and a channel in ‘Timer Power On’ menu must be disabled when Power
On Default is activated.
-
Programme
Select start channel number if Input source’s value is TV. (in case of ATV, it means physical channel
number.)
-
A/V Setting
If ‘A/V Setting’ is changed from ‘No’ to ‘Yes’, parameters that are set before entering ‘Installation Menu’ are
applied whenever turn on power.
y
y
Following Parameters are applied to basic.
»
Picture section - PSM mode, Picture Data (Contrast, Brightness, Color, Sharpness, Tint)
»
Sound section - SSM mode, Sound Data (Balance, Equalizer Data)
»
AVL (Auto Volume Level) and Language, Teletext language, ARC Data. Except these, other
parameters are applied differently according to the TV-Set.
Summary of Contents for LV30 G Series
Page 52: ......
