16
USING YOUR REFRIGERATOR
WATER DISPENSER (On some models)
Dispenser
Switch
WHEN YOU SHOULD SET THE ICEMAKER
POWER SWITCH TO OFF (O)
When the water supply will be shut off for several hours.
WARNING:
Do not put your fingers up the ice chute
CAUTION:
Do not dispense ice into fine china or
crystal glasses. China or crystal can break.
AUTOMATIC ICEMAKER (on some models)
When the ice bin is removed for more than one or two
minutes.
When the refrigerator will not be used for several days.
NORMAL SOUNDS YOU MAY HEAR
CAUTION:
Icemaker
Power Switch
Ice detecting
sensor
PREPARING FOR VACATION
Some dripping may occur after dispensing. Hold your cup
beneath the dispenser for a few seconds after dispensing to
catch all of the drops.
Set the icemaker power switch to OFF (O) and shut offthe water
supply to the refrigerator.
To dispense cold water, push on the dispenser switch with a
glass.
NOTE: The ice bin should be emptied when the icemaker
ON/OFF switch is turned to the OFF position.
The icemaker will produce approximately 100-130 cubes in
a 24-hour period, depending on freezer compartment
temperature, room temperature, number of door openings
and other operating conditions.
opening. Doing so can result in severe injury.
It takes about 12 to 24 hours for a newly installed refrig-
erator to begin making ice. Wait 72 hours for full ice
production to occur.
Ice making stops when the bin fills to the level of the feeler
arm.
To turn off the automatic icemaker, set the icemaker
switch to
OFF (O).
To turn on the automatic icemaker,set
the switch to
ON (I)
.
The water pressure must be between 20 and 120 psi on
models without a water filter and between 40 and 120 psi
on models with a water filter to produce the normal
amount and size of ice cubes.
Throw away the first few batches of ice (about 24 cubes).
This is also necessary if the refrigerator has not been used
for a long time.
Never store beverage cans or other items in the ice bin for
the purpose of rapid cooling. Doing so may damage the
icemaker or the containers may burst.
Never use thin crystal glass or crockery to collect ice. Such
containers may chip or break resulting in glass fragments
in the ice.
DO NOT place fingers or hands on the automatic ice
making mechanism while the refrigerator is plugged in.
WARNING
Personal Injury Hazard
NOTE: The ice bin should be emptied anytime the icemaker
ON/OFF switch is turned to the OFF (O) position.
NOTE: Keeping the power switch in the ON (I) position
before the water line is connected can damage the
icemaker.
The icemaker water valve will buzz as the icemaker fills with
water. If the power switch is in the
ON (I)
position, it will buzz
even if it has not yet been hooked up to water. To stop the
buzzing, move the power switch to
OFF (O).
You will hear the sound of cubes dropping into the bin and
water running in the pipes as the icemaker refills.
If the ambient temperature will drop below freezing, have a
qualified technician drain the water supply system to prevent
serious property damage due to flooding caused by ruptured
water lines or connections.
Summary of Contents for LTCS20020
Page 35: ...NOTES 33 ...
Page 67: ...NOTAS 65 ...
Page 99: ...NOTES 97 ...
Page 100: ...NOTES 98 ...