How to adjust the refrigerator door level difference
How to adjust the refrigerator door level
difference
1. When the refrigerator door is low
2. When the freezer door is low
1. Open the door.
2. Use the spanner included in the document to turn the height
adjustment screw located on the bottom of the refrigerator
hinge in clockwise direction to adjust the height.
1. Open the door.
2. Use the spanner included in the document to turn the height
adjustment screw located on the bottom of the freezer
hinge in clockwise direction to adjust the height.
How to adjust the door level difference
1. When the bottom part of refrigerator door unleveled.
2. When the bottom part of freezer door unleveled.
1. Put thr install plate under the rear corner of the refrigerator.
2. Check the movement of the freezer
3. If the freezer does not fixed, in screw the leg until it reaches
on the floor.
1. The same as refrigerator room.
* It may be unleveled concerning installed condition of the
floor.
Summary of Contents for LSXS26326
