LG LSXS263 Series Owner'S Manual Download | Manualshive

Page: 19 / 56

background image

19

INSTALLATION

ENGLISH

Leveling

After installing, plug the refrigerator’s power
cord into a 3-prong grounded outlet and push
the refrigerator into the final position.

Your refrigerator has two front leveling legs—
one on the right and one on the left. Adjust the
legs to alter the tilt from front-to-back or side-to-
side. If your refrigerator seems unsteady, or you
want the doors to close more easily, adjust the
refrigerator’s tilt using the instructions below:

NOTE:

Tools Required: 11/16” (18mm) wrench

or flat blade screwdriver.

1 Turn the leveling leg counterclockwise

to raise that side of the refrigerator or
clockwise to lower it. It may take several
turns of the leveling leg to adjust the tilt of
the refrigerator.

Left leveling

leg

Height

Height

difference

difference

PRESS & HOLD

CHANGE FILTER

C

F

C

F

NOTE:

Having someone push backward against the

top of the refrigerator takes some weight off of the
leveling legs. This makes it easier to adjust the legs.

Right leveling leg

Height

difference

Height

difference

PRESS & HOLD

CHANGE FILTER

C

F

C

F

2 Open both doors again and check to make

sure that they close easily. If the doors do
not close easily, tilt the refrigerator slightly
more to the rear by turning both leveling
legs counterclockwise. It may take several
more turns, and you should turn both
leveling legs the same amount.

Door Alignment

If the doors are still uneven after the refrigerator
has been leveled, finish adjusting the doors by
following the instructions below:

Adjusting tools: 5/16” (8mm) wrench and 3/4”
(19mm) wrench.

Height

difference

Height

difference

PRESS & HOLD

CHANGE FILTER

C

F

C

F

Up

Down

1 keeper nut

2 Adjustment

hinge pin

3 Tool for

adjustment



Using a 3/4” (19mm) wrench, turn the keeper
nut clockwise to loosen the keeper nut.



Using a 5/16” (8mm) wrench, turn the
adjustment hinge pin clockwise or coun-
terclockwise to level the refrigerator door.



After leveling the door, turn the keeper
nut counterclockwise to tighten it.

CAUTION:

Do not overtighten the door ad-

justment screw. The hinge pin can be pulled out
(adjustable range of height is a maximum of 2 in.
(5 cm)).

The height of the freezer door can also be adjusted
by inserting a maximum of three snap rings
(two rings are
included with
t h i s o w n e r ’ s
manual. To in-
sert, open the
f r e e z e r d o o r
and lift it at the lower hinge. Use a pliers to in-
sert the ring on the lower hinge pin.

«
...
17
18
19
20
21
...
»

Summary of Contents for LSXS263 Series

























































Reviews:

No comments

Related manuals for LSXS263 Series

Brand: GE Pages: 1

Brand: Smeg Pages: 12

2-WAY ELITE RM4872

Brand: Dometic Pages: 14

Brand: Smeg Pages: 12

Brand: KBS Gastrotechnik Pages: 54

Brand: Blomberg Pages: 112

Brand: German pool Pages: 27

Brand: Adler Europe Pages: 112

Brand: Daewoo Pages: 70

Brand: H&K Pages: 22

Brand: Marvel Pages: 12

Brand: MicroFridge Pages: 2

Brand: Philco Pages: 146

CoolMatic CRX50

Brand: Waeco Pages: 33

Brand: Lamona Pages: 24

Brand: Zanussi Electrolux Pages: 20

Brand: U-Line Pages: 47

Brand: Landmark Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands