LG LSXS263 Series Owner'S Manual Download | Manualshive

Page: 12 / 56

background image

12

INSTALLATION

ENGLISH

Ambient Temperature

Install this appliance in an area where the
temperature is between 55°F (13°C) and 110°F
(43°C). If the temperature around the appli-
ance is too low or high, cooling ability may be
adversely affected.

Measuring the Clearances

Too small of a distance from adjacent items
may result in lowered freezing capability and
increased electricity consumption charges.
Allow at least 24 inches (61 cm) in front of the
refrigerator to open the doors, and at least
2 inches (5.08 cm) between the back of the
refrigerator and the wall.

Removing/Assembling the
Refrigerator Door Handles

Removing the Handles

1

Loosen the set screws with a 3/32 in. Allen
wrench and remove the handle.

2

Loosen the mounting fasteners that connect
to the refrigerator door and handle using a

¼

in. Allen wrench, remove the mounting

fasteners.

Assembling the Handles

1

Assemble the mounting fasteners at both
ends of the handle using a

¼

in. Allen

wrench.

2

Place the handle on the door by fitting
the handle footprints over the mounting
fasteners and tightening the set screws
with a 3/32 in. Allen wrench.

NOTE

When it is necessary to move the refrigerator
through a narrow opening, removing the
doors is the recommended procedure. If it
is necessary to remove the handles, follow
the directions below. The appearance of the
handle may vary from what is shown in the
illustrations

Mounting

Fasteners

Set Screw

Allen Wrench

Mounting Fasteners

24” (61 cm)

2” (5.08 cm)

«
...
10
11
12
13
14
...
»

Summary of Contents for LSXS263 Series

























































Reviews:

No comments

Related manuals for LSXS263 Series

ENERGY STAR GBS22HBS

Brand: GE Pages: 2

CustomStyle GSC23LSRSS

Brand: GE Pages: 3

CustomStyle GSC23LGR

Brand: GE Pages: 3

Cafe CSHS5UGXSS

Brand: GE Pages: 2

Brand: GE Pages: 20

Brand: GE Pages: 120

Brand: GE Pages: 112

Brand: GE Pages: 48

Brand: GE Pages: 92

Brand: Camco Pages: 36

Brand: NEFF Pages: 20

Brand: CDA Pages: 20

Brand: Vestfrost Pages: 28

Brand: Hanseatic Pages: 58

Brand: Parmco Pages: 7

Brand: Qilive Pages: 180

Brand: True Pages: 2

Brand: Kuppersbusch Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands