LG LSXC22326 Service Manual Download Page 67

Page: 67 / 78

How to disassemble/reassemble the refrigerator home bar

1. Family home bar model

1-1. How to disassemble the home bar

How to disassemble/reassemble the refrigerator home bar

1-2. The Method to disassemble the Home Bar button

1. Loosen 2 screws on the hinge of the home bar located on
the top of the door.

2.Use the tool to separate the hinge. (But be careful not
to drop the home bar as it is heavy).

3.Hold the home bar with 2 hands and separate the
home bar by lifting it up from the door.

1. Separate the H/Bar Gasket adjacent to the Holder,Lever,and
then unscrew three screws.

2. Hold the Holder,Lever,and then pull left firmly to separate the
Cover Front.
It is able to separate the Holder,Lever if two screws,placed on
the back of the separated Cover
Front are unscrewed.

3. After unscrew the two Button Assembly screws,separate the
Button Frame.(Requires a small Screw Driver)

Summary of Contents for LSXC22326















































































Search results

Summary of Contents for LSXC22326

Reviews:

Related manuals for LSXC22326

Brands by name

Popular brands

LG LSXC22326, Service Manual

Search results

Summary of Contents for LSXC22326

Reviews:

Related manuals for LSXC22326

Brands by name

Popular brands