LG LSXC22326 Service Manual Download Page 3

Page: 3 / 78

Safety Warning and Cautions

Chapter 1 Safety Warning and Cautions

► Observing cautions for safety can prevent accidents and dangers.
► Cautions are classified into Warning and Caution and the meanings are as follows

WARNING indicates the possibility of serious injury or death if the
instructions are not followed.

Caution indicates a hazardous situation with the possibility of product
damage or personal injury if the instructions are not followed

WARNING

CAUTION

WARNING

Be cautious of electric shock.

Control board (PWB Main and Sub)
uses power supply of about 120 VAC.

Do not allow consumers to directly
repair, disassemble, or modify the
refrigerator.

Harm, electric shock,
or fire could occur.

Be sure the plug and cord are not
pressed by the rear side of the
refrigerator.

Damage to power plugs
could result in fire or
electric shock.

Plug the refrigerator into a
dedicated circuit.

Plugging in too many appliances
can result in fire or problems with
the operation of your refrigerator.

Summary of Contents for LSXC22326















































































Search results

Summary of Contents for LSXC22326

Reviews:

Related manuals for LSXC22326

Brands by name

Popular brands

LG LSXC22326, Service Manual

Search results

Summary of Contents for LSXC22326

Reviews:

Related manuals for LSXC22326

Brands by name

Popular brands