LG LSC27926 Service Manual Download Page 15

Page: 15 / 101

2-5.

ICE PLUS

ICE PLUS

is function to improve cooling speed of the freezing room by consecutively operating compressors and

freezing room fan.

ICE PLUS

is released if power failure occurs and then returns to the original status.

3. Temperature setting is not changed even if selecting the

ICE PLUS

4. The change of temperature setting at the freezing room or the cold storage room is allowed with

ICE PLUS

selected and prrocessed.

5. The cold storage room operates the status currently set with

ICE PLUS

selected and procesed.

6. If selecting the

ICE PLUS

, the

ICE PLUS

function is released after continuously operating compressor and

freezing room fan.

7. If frost removal starting time is arrived during

ICE PLUS

operation is done only for the remaining

time after completion of frost removal when the

ICE PLUS

operation time passes 90 minutes. If passing 90

minutes,

ICE PLUS

operation is done only for 2 hours after completion of frost removal.

8. If pressing

ICE PLUS

button during frost removal, the

ICE PLUS

LCD or LED is turned on but if pressing the

ICE PLUS

, compressor operates after the remaining time has passed.

9. If selection

ICE PLUS

within 7 minutes (delay for 7 minutes of compressor) after the compressor stops,

compressor operates after the remaining time has passed.

10. The freezing room fan motor operates at the high speed of RPM during operation of

ICE PLUS

MICOM FUNCTION

- 1

Summary of Contents for LSC27926






































































































Search results

Summary of Contents for LSC27926

Reviews:

LG LSC27926, Service Manual, Page: 15 / 101

Search results

Summary of Contents for LSC27926

Reviews: