LG LSC27910SB/01 Service Manual Download Page 19

Page: 19 / 97

2-5 ICE PLUS

1. Ice Plus increases the cooling speed in the freezer by running the fan and the compressor simultaneously.

2. Ice Plus is released if the power fails and is restored.

3. The temperature setting is not changed when Ice Plus is selected.

4. You can change the temperature in the freezer and the refrigerator even if Ice Plus has been selected and is in progress.

5. The refrigerator operates independently of the Ice Plus setting and operation.

6. At the end of the Ice Plus cycle, the freezer defaults to its original setting.

7. If frost removal starting time is arrived during Ice Plus, Ice Plus operation is done only for the remaining time after

completion of frost removal when the Ice Plus operation time passes 90 minutes. If passing 90 minutes, Ice Plus operation

is done only for 2 hours after completion of frost removal.

8. If pressing Ice Plus button during frost removal, the Ice Plus LCD or LED is turned on but if pressing the Ice Plus,

compressor operates after the remaining time has passed.

9. If selection Ice Plus within 7 minutes (delay for 7 minutes of compressor) after the compressor stops, compressor

operates after the remaining time has passed.

10. The freezer fan motor operates at the high speed of RPM during operation of Ice Plus.

- 18 -

2-6 Control of variable type of freezing fan

2-7 Control of cooling fan motor

https://appliancetechmanuals.com

Summary of Contents for LSC27910SB/01

































































































Search results

Summary of Contents for LSC27910SB/01

Reviews:

Related manuals for LSC27910SB/01

Brands by name

Popular brands

LG LSC27910SB/01, Service Manual

Search results

Summary of Contents for LSC27910SB/01

Reviews:

Related manuals for LSC27910SB/01

Brands by name

Popular brands