LG LSC27910SB/01, Service Manual

Page: 8 / 97

- 7 -
Removing the water filter:
1. For first-time installation, remove filter substitute cap
(A) by turning it counterclockwise a quarter turn and
pulling it down.
2. For subsequent installation, remove old filter by
slowly turning it to the left a quarter turn and pulling it
down.
Installing the water filter
Remove red cap from the filter and insert the two
tabs on the filter tip into the two slots in the
refrigerator filter receptacle. You should feel the filter
entering completely. Turn the filter to the right a quarter
turn clockwise to lock it into place. The locked symbol
will be lined up with the indicator arrow.
2. WATER FILTER
Before removing or installing water filter:
1. Take out the top shelf and move it to the lowest level.
2. Remove the lamp cover by pressing the tab under
the cover and pulling cover to the front.
3. IMPORTANT: Turn off household water supply.
After installing water filter
a) Replace the cover lamp and shelf to the initial
position.
b) Dispense 2.5 gallons (9.46 L) of water to purge the
system (dispense for approximately 5 minutes). Open
the refrigerator door and check the shelf area for
leaks.
c) After installing filter, turn on household water supply.
A
https://appliancetechmanuals.com