LG LS090HEV Owner'S Manual Download Page 22

Page: 22 / 24

Single Zone Mega and Mega 1

15V W

all Mounted Owner

’s Manual

Due to our policy of continuous product innovation, some specifications may change without notification.

troubleSHootIng

Table 7: Single Zone Mega Wall Mount System Troubleshooting (Continued)

Issue

Cause

Corrective Action

Unusual noise or vibration during unit operation.

Clicking noise during operation.

A clicking sound can be heard either

when the unit starts or stops due to

movement of the reversing valve.

These are normal noises for the air conditioner as it shifts into

different modes of operation. Once a mode is activated, noise

or vibration should stop.

Creaking sound during operation.

The plastic parts of the indoor unit

make sounds due to shrinkage

and expansion during sudden

temperature shifts.

Water flowing sounds.

Switching of the flow of refrigerant

through the air conditioner produces

water flowing noise.

Unusual odor emits from indoor unit.

A bad odor can emit from the indoor

unit due to mustiness or cigarette odor

being taken in by the indoor unit from

the room it is located in.

If the smell does not disappear, clean the air filter. If the odor \

persists after cleaning the air filter, contact the installing

contractor.

Table 8: Troubleshooting Wired Remote Controllers

Issue

Corrective Action

Directional buttons such as up/down or left/right

do not function when selected on wired remote

controller.

If the air conditioner function is available (active), then the wired remote controller will be able to change

the air conditioner operation mode.

Directional swing buttons do not display when

selected on the wired remote controller.

Unable to select power heating on indoor unit.

Unable to set power heating on wired remote

controller.

Not possible to set time for automatic on/off operation with a wired remote controller or by using app

software.

The remaining time for the automatic on/off

timer is not shown on the app software.

Wired remote controllers - PQRCVSL0(QW) or LG Programmable Thermostat - PREMTB10U (only sold in the US)

Summary of Contents for LS090HEV

























Search results

Summary of Contents for LS090HEV

Reviews:

Related manuals for LS090HEV

Brands by name

Popular brands

LG LS090HEV, Owner'S Manual

Search results

Summary of Contents for LS090HEV

Reviews:

Related manuals for LS090HEV

Brands by name

Popular brands