11-3
TROUBLE SHOOTING
Oven will not selfclean
“Crackling” or “popping”
sound
Too much smoking during a
self clean cycle.
Oven door will not open
after a self-clean cycle
Oven not clean after a self-
clean cycle
“CLOSE DOOR TO
CONTINUE BROILING” or
“DOOR OPENED” appears
in the display
“DOOR LOCKED” light is on
when you want to cook
Oven control beeps and
displays any F code error.
• The oven temperature is too high
to set a self-clean operation.
• Improper oven controls setting.
• This is the sound of the metal
heating and cooling during both
the cooking and cleaning
functions.
• Too much soil.
• The oven temperature is too high.
• Improper oven controls setting.
• The oven was heavily soiled.
• The broil or self-clean cycle has
been selected but the door is not
closed.
• The oven door is locked because
the temperature inside the oven
has not dropped below the
locking temperature.
• Allow the range to cool to room
temperature and reset the controls.
• See the “USING THE SELF-CLEANING
OVEN” section in user’s guide.
• This is normal.
• Touch the
“CLEAR OFF”
pad. Open the
windows to get rid of smoke from the room.
Wait until the
DOOR LOCKED
light goes
off. Wipe up the excess soil and reset the
clean cycle.
• Allow the oven to cool below locking
temperature.
• This can take up to 1 hr after the cycle is
complete.
• See the Using the “USING THE SELF-
CLEANING OVEN” section in user’s guide.
• Clean up heavy spillovers before beginning
the self- clean cycle. Heavily soiled ovens
may need to self-clean again or for a longer
period of time.
• Close the oven door.
• Touch the
“CLEAR OFF”
pad. Allow the
oven to cool.
• See the page 9-1 in this manual
PROBLEMS
POSSIBLE CAUSES
SOLUTIONS
CODE
F-1
F-2
F-3
F-6
F-10
F-11
Open oven sensor
Shorted oven sensor
Shorted keypad
Oven is too hot
Door locking system
don’t operate
No heating
CAUSE
Summary of Contents for LRG3091SB
Page 94: ......
