Owner's Manual
11
Preparation Before Operation
ENGLISH
Turning on the breaker closes the flap. (This is a normal procedure)
• Be careful not to cool (heat) the room too much. Keeping the temperature setting at a moderate level
helps save energy.
• Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling (heating) effect.
• Clogged air filters cause inefficient operation and waste energy.
Clean them once in about every two weeks.
n
Make air flow selection according to what suits you.
n
2 Vane Mode will automatically change blowing pattern depending on the operating mode & situation.
CAUTION
n
If you want to change air flow mode, you ask to installer. ( Default is 2 Vane Mode )
!
Operating Mode Situation Blowing Pattern
1. When the room has become fully cool.
Cooling Mode 2. When 1 hour has passed since turning on the Using only upper air outlet.
air conditioner.
1. At start of operation or other times when the Using upper & lower air outlet.
room is not fully cooled.
Heating Mode 1. Normal Operation
1. At start or when air temperature is low. Using only upper is outlet.
Tips for Saving Energy
1. Press the SET / CLEAN button for 3 seconds.
2. Press TIME SETTING buttons until the desired
time is set. (If you press down the button for a long
time, it will change quickly in the units of 10 min.)
3. Press the SET / CLEAR button.
Check the indicator for A.M. and P.M.
NOTE
Turn the breaker ON
Air Flow Selection
Setting the Current Time
