background image

16

Air Conditioner

Operating Instructions

The Upper Horizontal Vane can be adjusted by using the remote controller.
1. Press the ON/OFF button to start the unit.
2. Press the UPPER HORIZONTAL VANE CONTROL button. 

Each time the button is pressed, the air-flow 
direction is changed in the direction of the arrow.

STOP

1 Step

2 Step

3 Step

4 Step

5 Step

6 Step

Auto Swing

1 Step

2 Step

3 Step

4 Step

5 Step

6 Step

STOP

Auto Swing

h

Press the UPPER HORIZONTAL VANE CONTROL button once more during Auto Swing at the direction of airflow you want.

• Manually moving the Upper Horizontal Vane by hand could damage the mechanism.When the unit is

shut off, the the Upper Horizontal Vane will close the air outlet vent of the product.

h

When you restart the unit, Upper Horizontal Vane will be located as you selected before.

NOTE

C

o

o

lin

H

e

at

in

H

e

at

in

Auto Swing

Indoor Unit

Wireless 

Remote Controller

You can select the air outlet.
1. Press ON/OFF button to start the unit.
2. Press the AIR OUTLET button.

• If 

is selected, only upper air outlet will be opened and blow air.

• If 

is selected, only lower air outlet will be opened and blow air.

• If 

is selected, upper/lower air outlets will be opened and blow air.

Selecting air outlet direction

Upper Horizontal Vane Control

Summary of Contents for LQN120HV4




























Reviews: