manualshive.com logo in svg

LG LND3110R, Owner'S Manual

Share
Download
LG LND3110R Owner'S Manual Download Page 7

Operation and settings

 7

1.  Click this button to open the folder 

browse window. Click the button 

again in next time, video is recorded 

automatically without selection of 

folder.

Note:

If you want to change the folder, 

move to other pages or press the 

refresh button.

2.  Recording button is activated and 

recording will be started.

Note:

If recording exceed the time(1 hour) 

or size limit (1 GB), recording is 

stopped automatically with warning.

3.  To stop the recording, click this 

button during the recording. 

Configuration menu overview

The following table shows the list of menu items. 
The configuration images are different from each model.

Main Menu

Sub Menu

System

Version

Date & Time

Maintenance
Log & Report

Language

Audio & Video

Camera

Stream

Network

Basic

RTP stream

TCP/IP

DDNS

IP filtering

SNMP

QoS

802.1x

User

Basic

Event

Event server

Motion detect

Smart Analytics

Triggered Event

Scheduled Event

Configuring the LG Network Camera 

Device

The features and options of the LG IP camera are configured 

through the Configuration menu. 
Only administrator-level users have permission to access the 

Configuration menu.

Accessing the Configuration menu

Click the [Configuration] button to display the LG Smart Web Viewer 

configuration window.

Warning

The Configuration setup should be made by qualified service 

personnel or system installers. 

Summary of Contents for LND3110R
































Reviews:

No comments

Brands by name

Popular brands

Load more brands