manualshive.com logo in svg

LG LMX25984ST/01, Service Manual

Share
Download
LG LMX25984ST/01 Service Manual Download Page 63

- 63 -

13. OPERATION PRINCIPLE AND REPAIR METHOD OF ICEMAKER

13-1 OPERATION PRINCIPLE

13-1-1 Operation Principle of IceMaker

Power On

Start Position

• Adjusts EJECTOR to 

Start Position

with power on.

Icemaking

Mode

• Waits until water becomes ICE after starting the

icemaking operation.

Harvest

Mode

• Runs MOTOR to drop ice from the tray into the ICE BIN.

(During harvest mode, check if the ice bin is full)

Park Position

• Reaches Start Position

Fill

• Performs 

Ice Making Mode

after supplying water by

operating the SOLENOID in ICE VALVE.

Test Mode

• To operate LINE and SERVICE, press and hold the 

Fill Key

for 3 seconds. The icemaker will run through 

3 stages: 

Harvest

Fill

Icemaking

.

1. Turning the Icemaker stop switch off (O) stops the ice making function.
2. Setting the Icemaker switch to OFF and then turning it back on will reset the icemaker control.

Power

Switch

Test Button
Hole(use tool
like pin end of tool have to smooth) pin,

Ejector

Automatic
Shutoff Arm

Cube Size
Indicator Light

Summary of Contents for LMX25984ST/01














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands