LIP-6830
User Guide
2.7. Parking a Call
The Call Park feature lets you place a call on hold so another user can pick up the call. Call
Park is often used with paging systems to announce the call, then the desired user can dial the
park location to access the call.
To Park an active call:
1) Press the Right direction button
, the Next Menu is displayed.
2) Press
[Park]
Soft key. Your current extension number is shown as the default park
destination.
3) Press
[ OK ]
Soft key.
4) Hang-up to complete the Call Park.
To change the Park location to another extension:
1) ~ 2) Refer to the above steps.
3) Press
[CHNG]
Soft key.
4) Dial the new destination extension number followed by
5) Hang-up to complete the Call Park.
.
To exit the Call Park Menu:
1) ~ 2) Refer to the above steps.
3) Press
[CNCL]
Soft key, to exit the Call Park Menu.
Notes
:
While parked, the parked party hears MOH (Music-on-Hold).
If a call is parked and not picked up within
two minutes
the call will ring-back to the
parking
user.
Calls may only be parked to other internal extensions.
Only one call can be parked at an internal extension.
2.8. Picking Up a Call
When a call is ‘Parked’ at an extension you are not near, you may access the call from the
nearest extension using the Call Pickup feature.
To Pick-up a parked call:
1) Press
[Pick]
Soft key.
2) Dial the parked extension number followed by
.
2.9. DND (Do-Not-Disturb)
The DND (Do Not Disturb) feature places the LIP-6830 in a ‘no-ring’ state. If the LIP-6830 is in
DND, an incoming call to your extension will not cause the phone to ring.
To activate DND:
1) Press
to activate DND. When activated, the
button LED will light red.
6
To deactivate DND:
1) Press the illuminated
button again.
