LG LHB976 Service Manual Download Page 52

Page: 52 / 193

2-37

DIGITAL DISPLAY & MEDIA TRAINING MASTER

9-6. Check your internet connection

Before starting cinemanow service,

it is checked whether internet is connected or not,

but during the network communication,

it is detected that internet connection is closed.

A user make it sure that internet connection is working.

Even though there is no problem at our

internet connection,

but we still fail to connect Cinemanow Server.

It will be solved by Cinemanow.

It happens that server response does not

finished within 30 seconds. However there

is no error at internet connection and

cinemanow server. It is due to network

congestion, so a user can retry it just a

few minute later.

Still a user have problem,

Check internet speed with this url

http://www.speakeasy.net/speedtest/

http://www.speedtest.net/

Andmore, to improvement, contact your ISP.

# Check Internet Access

Cannot connect to the internet.

Please make sure your internet connection is working properly,

and that your device is setup properly

9-7. Cannot connect to CinemaNow Server.

9-8. TimeOut

# Cinemanow Support

CinemaNow has encountered a Technical problem.

Please retry. If the problem persists, please contact CinemaNow

customer support at www.cinemanow.com/support

(Cannot connect to CinemaNow Server)

# Network Congestion

Cannot connect to CinemaNow service at this time.

Please try again in a few moments.

Summary of Contents for LHB976


































































































































































































Search results

Summary of Contents for LHB976

Reviews:

Related manuals for LHB976

Brands by name

Popular brands

LG LHB976, Service Manual

Search results

Summary of Contents for LHB976

Reviews:

Related manuals for LHB976

Brands by name

Popular brands