LG LHB976 Service Manual Download Page 58

Page: 58 / 193

2-43

DIGITAL DISPLAY & MEDIA TRAINING MASTER

No Server Found

1. Check Unit Network Status
2. Check the server and BD Player are connected to same access pointer.
3. Check server turn on.

Network Error,

Congestion Error

Network Busy Error

1.Check Server status

2.if Server is ok, retry to conect server

3.if server has no response, restart server

4.if Computer has no response, restart computer.

5.If congestion error or network busy error is occurred repeatedly,
5.1 Turn off other devices that is connected to access point.
5.2 Restart Router

Access Deny

1.Check if Nero is set with access deny.
Nero Server -> device (left menu) -> select devices ->
change Access Control -> set Access Allow

10-7. Network Error case

Summary of Contents for LHB976


































































































































































































Search results

Summary of Contents for LHB976

Reviews:

Related manuals for LHB976

Brands by name

Popular brands

LG LHB976, Service Manual

Search results

Summary of Contents for LHB976

Reviews:

Related manuals for LHB976

Brands by name

Popular brands