LG LHB645 Service Manual Download Page 21

Page: 21 / 113

2-6

DIGITAL DISPLAY & MEDIA TRAINING MASTER

What cables is the customer

using to connect the BD?

YES

Determine what cables the customer is using to connect the BD to

the TV and if connected properly. Refer to OM for connections.

Tighten any loose cables. Make sure the customer is not connecting

a BD to VCR or BD to DVD Recorder. Copy protection can distort

the picture on older VCR models.

Is the TV set to

the correct input?

YES

Make sure the TV is on the correct input. Turn TV off,

then on to determine input. Video when using composite, or component.

DVI when using DVI, and HDMI when using HDMI.

Does blurriness appear when

watching multiple discs?

YES

One disc displaying the issue is a problem with the disc.

Multiple discs displaying the problem could indicate the BD lens

needs to be cleaned. Recommend the customer use a lens cleaner on

the BD. A lens cleaner is available at any local electronics retailer.

Does blurriness appear when

watching a TV program?

YES

Blurriness appearing when watching a TV program indicates an

issue with the display. If the TV program is fine, then connect

the BD to another input on the display to determine if the problem

is following the BD.

Does blurriness appear

when the BD is connected to

another TV?

YES

Connect the BD to another TV and play a disc. No blurriness

during disc play back indicates a problem with the first TV.

Please refer to the owners manual for instructions on how to connect

the BD to a TV. If the BD has a problem on the second TV,

then see service chart for service information.

Has the customer tried

another set of cables?

Have the customer try another set of cables.

A bad cable can also cause video problems. Test the cable with another

device to the TV to also determine if the TV is bad. If BD is problem, please

see service chart for service information.

1-5. Blurry Picture

Distorted picture refers to the customer getting video, but there is a problem with the video.

Summary of Contents for LHB645


















































































































Search results

Summary of Contents for LHB645

Reviews:

Related manuals for LHB645

Brands by name

Popular brands

LG LHB645, Service Manual

Search results

Summary of Contents for LHB645

Reviews:

Related manuals for LHB645

Brands by name

Popular brands